XPERT Tile-Bond


XPERT Tile Bond

Modified Cement Based Water Resistant Tile Adhesive

XPERT Tile Bond can be used on new concrete, old concrete, cement plaster and brick and block work. It also can be used for spot bonding of insulation materials such as polystyrene. When using ceramic tiles of low water absorption such as fully vitrified, quarry tiles, natural stone, marble and slate, mix XPERT Tile Bond with/without XPERT Tile Bond Latex should also be used on more difficult surfaces including that subject to continual dampness, wooden floors, particle board, gib board walls, old tile floors, vinyl asbestos flooring, linoleum etc.

High quality adhesive for the permanent fixing of ceramics tiles over smooth surfaces such as existing tiles, ceramic tiles or glass and external facia applications.
The substrate should be free of dust, grease, dirt, loose plaster, laitance, curing compound, paint etc. New concrete should be sufficiently aged and shiny smooth surfaces on old concrete should be acid etched or scabbled. Any surface in doubt should be primed with XPERT Tile Bond Latex brushed on straight from the container. Allow to become tacky before tiling. All substrates should be securely fastened and properly supported to eliminate any movement which may cause cracking.
Yield: 6-9 m2/bag


Get Online brochure on
XPERT Tile Bond