Products
Our Products
Trust the Experience
Xpert Powder 5000 (WP)
Water Proofing Agent for Concrete Block is a calcium stearate dispersion developed to function as a water protective additive to cement based construction forms, when used as an internal additive
XPERT SILICA FUME (S.F-D)
is a very fine pozzolanic material composed of amorphous silica, produced as a by-product from electric arc furnaces during the manufacture of elemental silicon or ferro silicon alloys. XPERT Silica Fume (S.F-D) is a dry, densified micro silica admixture designed to significantly increase concrete compressive and flexural strengths, durability, and impermeability, making it ideal for high-performance concrete applications.
XPERT CURE W & W2
XPERT CURE W-W2 is a VOC-compliant, ready-to-use, emulsified wax curing agent designed to protect fresh concrete by forming a clear membrane that minimizes moisture loss without staining surfaces. It is low odor, suitable for interior and exterior applications, and sprays on easily to provide maximum water retention, ensuring superior concrete curing.
Xpert Epoxy Mortar
Three component, epoxy resin based putty for sealing cracks and blow holes on concrete floors and walls. is a general-purpose epoxy mortar based on specially selected epoxy resins, hardeners and aggregate for use as a repair mortar for cracked or damaged concrete
Xpert Epoxy LV
is a low viscosity epoxy grout based on specially selected epoxy resins and hardeners to produce a highly fluid grout for injection into cracks in masonry and concrete.
XPERT Paste Epoxy
is a trowel able, sag resistant patching compound for concrete and other substrates. This compound is two components, 100% non-volatile filled epoxy/amine resin system. Sand and coarse aggregate or fillers can be used in this system as an extended to permit more economical compounding. As much as two parts of sand (by volume) can be used with one part of the mixed binder.
Xpert Repair Mortar
is a fine filled, light weight, cementitious mortar, specifically formulated for the repair of damaged concrete where a high build is required. The specially selected cements and polymers contained in XPERT Repair Mortar allow the buildup of 70mm without slump and exceptional adhesion to concrete and masonry materials with negligible shrinkage.
XPERT PU-IF 360
is solvent free, single component polyurethane, foam certified for contact with potable water (Drinking Water).
XPERT PLUG 505
XPERT PLUG 505 is a one-component, quick-setting, Portland-cement-based hydraulic repair mortar that instantly stops running water through holes or cracks in concrete or masonry. The product expands as it sets to lock into place even under constant water pressure. Fast setting, can stop running water and develops high strength quickly Fully hydraulic, sets above or below water Shrinkage compensated; expands to lock in place One component, mixes easily with water only Ready to topcoat in 15 minutes with appropriate product to minimize downtime Durable, non-metallic, non-gypsum formula maintains volume stability over time Formulation available for cold-weather applications suitable for all seasons and climates Certified to NSF/ANSI Standard 61 for potable water contact
XPERT Fairing Coat
XPERT Fairing Coat is a fine-filled, fast-setting, cementitious mortar specifically formulated for repairing damaged concrete where only a thin layer is required. It provides excellent adhesion and durability with negligible shrinkage
Xpert Seal 1 Grey
waterproof coating is a two-component waterproof system, consisting of a cementitious powder and a specially formulated acrylic polymer solution. When XPERT Seal X1 powder mixed with XPERT Seal X1 solution to a lump-free consistency it provides a waterproof coating that is easily applied by brush or roller to concrete and masonry above and below ground level.
Xpert Seal X-1 White
waterproof coating is a two-component waterproof system, consisting of a cementitious powder and a specially formulated acrylic polymer solution. When XPERT Seal X1 powder mixed with XPERT Seal X1 solution to a lump-free consistency it provides a waterproof coating that is easily applied by brush or roller to concrete and masonry above and below ground level.
Xpert WP Thermo Shield
XPERT WP Thermo Shield Coating is a rubberized latex copolymer formulation designed for waterproofing and damp proofing concrete and steel structures. This versatile product is suitable for both residential and commercial applications, including foundation walls, floors, and roofs. XPERT WP Thermo Shield prevents the penetration of water and other chemicals, while also bridging small cracks up to 1/16”. It can be applied to both exterior and interior surfaces and acts as a moisture vapor retarder. The coating not only provides weatherproof protection but also reflects heat, making it an excellent choice for energy efficiency in buildings.
Xpert Seal 2-K Grey
waterproof coating is a two-component waterproof system, consisting of a cementitious powder and a specially formulated acrylic polymer solution. When XPERT Seal 2K powder mixed with XPERT Seal 2K solution to a lump-free consistency it provides a waterproof coating that is easily applied by brush or spray to concrete and masonry above and below ground level.
Xpert Seal 2-K white
waterproof coating is a two-component waterproof system, consisting of a cementitious powder and a specially formulated acrylic polymer solution. When XPERT Seal 2K powder mixed with XPERT Seal 2K solution to a lump-free consistency it provides a waterproof coating that is easily applied by brush or spray to concrete and masonry above and below ground level.
XPERT SEAL FLEX – 500
XPERT SEAL FLEX – 500 is a high-quality, two-part flexible waterproofing and protective coating specially formulated with premium Portland cement, carefully graded aggregates, additives, and an acrylic emulsion polymer binder. When mixed, it chemically reacts to form a hard, flexible film that bonds strongly to concrete and masonry surfaces. This seamless membrane provides an effective barrier against waterborne salts, atmospheric gases, and moisture intrusion while allowing trapped moisture to escape. It is designed to offer durable waterproof protection for roofs, foundations, basements, and various concrete or masonry substrates, making it ideal for both interior and exterior use in industrial, commercial, and residential structures.
Xpert Roof -PU 570
s a rapid cure, one component, cold applied, moisture-triggered, and aliphatic-aromatic pure polyurethane membrane based on unique I-cure technology.
Xpert Seal CS
XPERT SEAL contains moisture activated additives that plays major role as catalyst in the formation of water-insoluble crystalline micro structure deep within the capillaries & interstices of cementitious matrix of concrete and mortar. As the crystalline capillary waterproofing system enables effective pore sealing it does not rely on film formation on the surface and is not affected by the negative hydrostatic pressure.
XPERT Epoxy Floor Coat
XPERT Epoxy Floor Coat is a high-build, 100% solids, solvent-free polyamine epoxy system designed for concrete floors requiring maximum durability and chemical resistance. It provides a smooth, high gloss finish and is available in clear and color formulations.
XPERT FLOOR HARD
XPERT Floor hard is an integral floor hardener, formulated with hard-wearing quartz, silica, and corundum. The high cement content and low water-cement ratio in the resulting topping provide a case-hardened finish to concrete slabs.
XPERT FLOOR COAT
XPERT EPOXY FLOOR COAT provides maximum durability and excellent chemical resistance for concrete floors. It strengthens the concrete slab by bonding within it, especially around minor cracks and weak spots. The coating forms a smooth, non-porous, high-gloss finish that is easy to clean and maintain, helping to reduce overall maintenance costs. During installation and curing, it is virtually odor-free. The product also offers excellent adhesion (100%), flexibility, and hardness (3H-6H) when fully cured. Equipment used for application can be cleaned with common solvents.
Xpert Epoxy Sl-1
XPERT EPOXY SL-1 is a three-component, solvent-free, self-smoothing, epoxy flooring system. It is a heavy-duty floor system made from epoxy resins, hardeners, and specially selected filler material to create a self-smoothing topping for concrete. This product provides a glossy, seamless finish and is applied at a thickness of 1-3mm. XPERT EPOXY SL-1 is designed for application on prepared and primed concrete surfaces in heavy-duty industrial environments.
Xpert Epoxy Stone 140
Xpert Zinc Premer
XPERT EP
XPERT EP - 100 is a high-performance, two-part, solvent-free epoxy primer coating that cures with amine, offering excellent leveling and adhesion on a variety of surfaces. This primer boasts 100% volume solids, providing a durable, clear, and glossy finish that is both water-resistant and chemically resistant. Its sealing properties are exceptional, protecting substrates from moisture and chemical exposure, and it demonstrates strong resistance to salt corrosion. XPERT EP - 100 is ideally used as a primer and sealer for epoxy flooring systems, and it can be applied on cement, wood, stone, and wall surfaces, including applications above or below the waterline. The product can be applied easily using spray, brush, or roller methods.
XPERT PU CRETE MF
XPERT PU CRETE MF is a self-smoothing, three-component polyurethane floor coating designed to withstand thermal shocks. It provides a seamless matte finish with excellent resistance to chemicals, mechanical wear, heat, and slip. This flooring system is ideal for industries requiring hygienic, durable, and safe surfaces such as food processing, pharmaceuticals, cold storage, warehouses, and packaging plants.
XPERT CLEAR EPOXY - 220
is a premium, clear two-component liquid composed of 100% thermo-setting epoxy resins. This solvent-free epoxy system cures into a very hard, durable solid that maintains enough resilience to resist impact and vibrations without becoming brittle. It is specially formulated as a clear, ultra-high gloss coating that self-levels and cures efficiently at room temperatures ranging between 15˚C and 32˚C. The advanced formulation features excellent air-release properties and is optimized for extended UV stability, ensuring long-lasting clarity and protection.
Xpert Anchor Epoxy
XPERT Anchor epoxy is a high strength epoxy paste for anchoring fixings into concrete and use as a general-purpose adhesive.
XPERT XRE-400
XPERT XRE-400® is a premium, two-component epoxy anchoring system designed for high-performance anchoring and doweling applications. It features a precise 1:1 mix ratio, delivering unmatched strength and durability. The product is suitable for use in temperatures ranging from 4°C to 43°C (40°F to 110°F) and is formulated to perform reliably in both dry and damp environments. Tested under ASTM standards E-488 and E-1512, XPERT XRE-400® withstands static, dynamic, seismic, and wind loads in uncracked concrete, making it an ideal choice for securing threaded rods and rebar. Its formulation provides fast curing, high modulus, and minimal odor, ensuring both professional handling and long-lasting results.
XPERT XRE-100
XPERT XRE-100 is a high-performance, two-component epoxy system specifically designed for anchoring and doweling applications. It provides exceptional structural strength when securing threaded rods, bolts, and reinforcing bars into both cracked and uncracked concrete. The epoxy system cures effectively within a temperature range of 40 °F to 110 °F (4 °C to 43 °C), ensuring versatility across various environmental conditions. Its chemical formulation is moisture insensitive, allowing reliable installation even in damp or slightly wet environments. The mixed adhesive typically exhibits a concrete gray or yellowish color, depending on the batch, and is supplied in a convenient 1:1 resin-to-hardener ratio, facilitating easy mixing and consistent performance.
XPERT Epoxy Tile Grout
XPERT Epoxy Tile Grout is a three-component epoxy tile grout comprised of a 100% solids epoxy resin blend and a proprietary aggregate blend designed to produce exceptional flow, high strength and chemical resistance. It is formulated to withstand dynamic loading, high bearing and is easier to place in narrow configurations and between the ceramic tiles.
XPERT FLOW GROUT-65
XPERT FLOW GROUT – 65 is a high-strength, non-metallic, and non-shrink grout formulated for precision grouting and general construction uses. It can be prepared in fluid, flowable, or plastic consistencies simply by adding a controlled amount of clean water. This grout is a carefully engineered blend of Portland cement, graded fillers, and chemical additives that enable controlled expansion during its plastic state while minimizing water requirements. The low water demand helps achieve high early strength and ensures a uniform, consistent grout mix suitable for demanding structural applications.
Xpert Expanding Grout
XPERT Expand Grout is an admixture for cementitious grouts where reduced water/cement ratio and positive expansion is required. The Expanding agent, by generating gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The Plasticizing agent enables high workability mixes to be produced with relatively low water/cement ratios stability and cohesion of the grout are greatly increased. The expansion is controlled to avoid excess being built up.
XPERT FLOW GROUT-85
XPERT FLOW GROUT – 85 is a premium pre-blended cementitious composite powder designed by XPERT research laboratories. It is composed of high-strength cement, well-graded aggregates with particle sizes ranging between 2 to 5 mm, and special additives including an expansive agent. When mixed with water, it transforms into a fluid grout capable of filling small and interconnected spaces efficiently. Due to its expansive agent, XPERT FLOW GROUT – 85 exhibits zero shrinkage during both its plastic and hardened phases, while developing very high early compressive and flexural strengths. This makes it ideal for precision grouting and anchoring applications.
XPERT EPOXY T-100
XPERT EPOXY T-100 is a two-component, high-performance coating system designed to provide outstanding protection in highly aggressive environments. Comprising Component A (resin) and Component B (hardener), this epoxy coating is specifically formulated to resist a broad range of corrosive substances including acids, alkalis, sour crude oil, fuel, diesel oil, sewage water, and detergents. Ideal for both fresh and saltwater immersion, it excels in applications subjected to acidic exposures and is perfect for use on properly cleaned steel and concrete surfaces. XPERT EPOXY T-100 is particularly effective in environments requiring protection from severe corrosive elements, including pipelines, sewage treatment plants, and marine structures.
XPERT Epicrete
XPERT Epicrete is a bonding agent for new to old concrete based on specially selected epoxy resins and hardeners. Also suitable for application of epoxy mortars to damp substrates.
XPERT Tile Bond Grey
XPERT Tile Bond can be used on new concrete, old concrete, cement plaster and brick and block work. It also can be used for spot bonding of insulation materials such as polystyrene. When using ceramic tiles of low water absorption such as fully vitrified, quarry tiles, natural stone, marble and slate, mix XPERT Tile Bond with/without XPERT Tile Bond Latex should also be used on more difficult surfaces including that subject to continual dampness, wooden floors, particle board, gib board walls, old tile floors, vinyl asbestos flooring, linoleum etc.
XPERT Tile Bond White
XPERT Tile Bond can be used on new concrete, old concrete, cement plaster and brick and block work. It also can be used for spot bonding of insulation materials such as polystyrene. When using ceramic tiles of low water absorption such as fully vitrified, quarry tiles, natural stone, marble and slate, mix XPERT Tile Bond with/without XPERT Tile Bond Latex should also be used on more difficult surfaces including that subject to continual dampness, wooden floors, particle board, gib board walls, old tile floors, vinyl asbestos flooring, linoleum etc.
Xpert SBR Latex
XPERT SBR Latex is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Taking Slurry as a priming coat or tight render basecoat. Used with Sulphate resistant cement it will resist the movement of salts with in wall.
Xpert SBR
Xpert Uraseal
XPERT URASEAL is formulated for sealing joints where high performance is required. Suitable for expansion and construction joints in concrete both in situ and pre cast, for sealing window and door perimeters and marble, granite and GRC facades. XPERT URASEAL is suitable for use in potable water.
XPERT BITUSEAL
XPERT BITUSEAL is a specially formulated, trowel-applied rubberized bitumen sealant and adhesive. It is designed as a semi-stiff paste with a specific gravity ranging from 1.2 to 1.3 and a solids content of at least 80%. Due to its unique formulation, BITUSEAL is also suitable for the cold bonding of roofing felt. This versatile product is ideal for sealing and waterproofing joints and cracks on concrete, masonry, or asphalt surfaces, both horizontally and vertically. It is particularly useful in roofing applications, including sealing and pointing horizontal chases and waterproofing materials, flashing, and guttering.
XPERT PROFIBER CW SYSTEM
XPERT PROFIBER CW SYSTEM is an advanced structural strengthening solution comprising externally bonded carbon fiber fabrics combined with specialized resin products. This Carbon Fiber Reinforced Polymer (CFRP) system is designed for on-site installation to reinforce concrete, masonry, or timber structures. It enhances the structural integrity by providing flexural and shear reinforcement where additional strength is required. The system features thixotropic, solvent-free impregnation resins that allow easy application and ensure durable bonding and encapsulation of the carbon fiber fabrics to the substrate.
XPERT PROFIBER CP SYSTEM
The XPERT PROFIBER CP SYSTEM is a heavy-duty structural strengthening solution utilizing advanced carbon fiber reinforced polymer (CFRP) plates. This system is designed to reinforce and strengthen a variety of structural materials including reinforced concrete, masonry, stonework, aluminum, and timber. The system consists primarily of high-strength CFRP plates combined with a specially formulated epoxy adhesive that bonds the carbon fiber reinforcement securely to the substrate. Available in different thicknesses and widths, the system offers a durable and effective means of improving the structural integrity of buildings and infrastructure.
XPERT PROFIBER CW ADHESIVE
XPERT PROFIBER CW ADHESIVE is a 100% solids, low viscosity epoxy resin designed specifically to encapsulate XPERT PROFIBER carbon, glass, and aramid fiber fabrics. When combined with these fiber reinforcements, it cures to form a high-performance Fiber Reinforced Polymer (FRP) laminate. This laminate significantly enhances the structural strength of concrete, masonry, steel, and wood elements. The adhesive’s low odor and low VOC formulation make it suitable for both interior and exterior applications.
XPERT BAR-P10/20
XPERT SWELL BAR-P10/20 is a hydrophilic polymer-based water-stop designed for effective sealing in construction joints and precast concrete segments. It expands up to 800% on contact with water, providing reliable waterproofing under high pressure. Environmentally friendly and durable, it’s ideal for use in potable water tanks and tunneling projects
Xpert Solvent Cleaner
Xpert WaterStopper
XPERT-PP-FIBRE
XPERT PP FIBRE is a polymer-based product, consists of polypropylene fibre that disperses homogeneously into the concrete mixture to reduce shrinkage and settlement cracks, improve freeze-thaw performance, fire, abrasion and impact resistance.
XPERT BARRIER
XPERT BARRIER EC25 is a powerful, low-odor termiticide and insecticide formulated with 25g/L of Fipronil, designed for both pre- and post-construction termite control. It offers long-lasting protection against subterranean termites by using a unique non-repellent “Transfer Effect” technology. This means termites unknowingly carry the chemical back to their colony, effectively eradicating the entire population over time. Trusted globally, XPERT BARRIER EC25 provides peace of mind with up to 10 years of protection, suitable for Pakistan’s climate where termite infestation is common.